Lasik Near | Post Surgery


  • The LasikNear is the first and only post refractive surgery multifocal on the market today.
  • Manufactured in any material, however, recommended in higher index materials.
  • Reverse Geometry back surface to fit ablated corneas, with high eccentric front surface to accommodate great intermediate and near vision.


  • Any patient who has had LASIK, RK, Corneal Transplant or corneal trauma.
  • A patient that has presbyopic needs.
  • Combine the two modalities, and there is the LasikNear.
Lasik Near Fitting Guide
Lens Type | Reverse Geometry Multifocal
Diagnostic Lens Color | Blue
  1. The selection of the base curve is determined by 'mean K'.
  2. The lens should demonstrate 1 - 2 mm of movement and an alignment pattern across the horizontal meridian.
  3. Analyze the peripheral curve for an alignment pattern with an adequate edge lift, if adjustments are needed, use the step system to customize the fit.
  4. Over-refract the patient to arrive at a spherical power change for best visual acuity, if possible.
  5. Evaluate the fit with the near card to determine whether the standard +2.25 add is sufficient.
  6. Call your Valley Contax lens consultant to customize the fit for your patient.